WPC Cladding Installation Perth has to be done in the proper method if you want the cladding to last you a lifetime. Nowadays, numerous individuals are deciding to go with WPC cladding for their walls as it gives their home a superior look. Not just the looks, it is also robust and resistant to changing weather situations. All this can be achieved only if the cladding is installed properly. Read the blog to gain knowledge regarding the common mistakes that should be avoided during installation.
Not Preparing the Surface Properly
One big mistake that individuals normally make during WPC cladding installation Perth is placing it on a dirty surface. Cladding should never be placed on an uneven or dirty surface. This is because it will not sit well, which will lead to panels falling down. The dust on the walls will not allow the glue to get stuck to the panels. So, before you commence the process, clean the wall thoroughly. Verify that the wall is dry before you spread the glue. If the wall is uneven, do some extra work to even the surface so that a smooth base is created to fix the cladding.
Skipping the Gap between Boards
The cladding placed on the wall should be placed in such a way that there are some gaps between each board. Most of the individuals do not do this while installing WPC Wall Cladding Perth. You need to understand that one component of the panel is wood. And wood has the tendency to expand when the temperature changes. Thus, if you do not leave some gap for the board to expand, then they may press against each other, causing the board to break. When you set the boards, guarantee that there is a slight gap between each board to dodge expensive impairment.
Using the Wrong Tools or Fasteners
If you plan to utilize WPC for your walls, then you must know what the best tools are that should be employed. Otherwise, the wrong fasteners used for the purpose will damage the boards. Some people use nails to fasten the boards to the walls. Screws are fine unless and until they do not rust or are very thin. When cutting the boards also the proper tools should also be employed; otherwise, the boards will be damaged. Ensure that you ask your supplier what the best clips or fasteners are that are recommended. This way, you can be assured that your boards will be secure.
Not Planning for Water Drainage
While doing the WPC cladding installation Perth, you should be aware to have a plan for draining water. Of course, the panels protect your wall from rain and moisture, only if you have a suitable drainage plan. Otherwise, the water will get accumulated behind the panels, causing the growth of fungus that will damage the structure. You can either create a small slope or holes behind the cladding so that the water can easily drain out. This form your wall will be dry and safe from future damage.
If you pay attention to these factors while installing the WPC panels, then you need not worry about the longevity of the panels. It will stay the exact same. Pay concentration to the instructions furnished by the supplier to extend the life of the panels.
